How to store metal carved panels？

Metal carved panels are a new type of building material widely used in our daily lives. Their practicality is strong, bringing great convenience to our lives. Besides the quality of the material itself, the quality of construction is also crucial. Poor construction quality will significantly affect the final result. Below, a metal carved panel manufacturer discusses some issues to pay attention to during construction.

1. Before construction, ensure that the base surface of the wall is qualified, and that it is flat, solid, and free of dirt and debris.

2. Before construction, use a chalk line to mark out the area where the integrated insulation board will be installed, for example, to distinguish between different floors.

3. During insulation construction, there are always some key and difficult areas, such as eaves, wall corners, and board joints. These areas must be treated strictly in accordance with construction specifications.

Here's a brief introduction on how to store metal carved panels:

1. The metal carved panel should be surrounded by a non-combustible material.

2. The storage location should be a fire-prohibited area, and there should be no open flames above the storage area. It should also be clearly marked.

3. Flammable, explosive or other dangerous materials must not be placed nearby.

4. After storage, appropriate fire extinguishers, sandboxes, or other fire extinguishers that can be used to extinguish metal carved panels should be provided.

5. It is recommended that the amount of materials stored should not exceed three days' worth of use, and they should be covered with non-flammable materials.

How to determine the quality of a metal carved panel

1. When purchasing metal carved stone panels, you can tap the stone to check its solidity. Tap its surface, listen to the sound, and feel the texture. If the stone is of good quality, it will produce a crisp and solid sound. This will help you avoid choosing stone with minor internal cracks.

2. Observe the surface structure of the stone with the naked eye; the finer the particles, the better the quality.

3. If there are cracks in the structural surface, there is a risk of future breakage, which is not very aesthetically pleasing for showcasing the overall texture of the stone.

How to make metal carved panels waterproof?

1. Generally, some materials are used in the waterproof layer of metal carved panels, such as asphalt rolls, etc. Fiber fabrics are used in combination with asphalt, and some powder is sprinkled on the surface. After treatment, the waterproofing purpose is achieved.

2. Different materials and construction methods have different waterproofing effects. For example, the loose-lay method, strip-applied method and hot-melt method are commonly used. Choose the appropriate construction method during construction.

3. Apply a base treatment agent to the base layer of the Harbin metal carved panel. By adding the treatment agent, the bonding between the waterproof material and the base layer can be strengthened, thereby enhancing the waterproof effect.

4. Use compatible integrated exterior wall insulation materials. The compatibility and fit between materials should be matched to achieve better insulation and waterproofing effects.