What are the factors that cause metal carved panels to age?

1. Thermal stress. Thermal expansion and contraction caused by temperature differences can cause the volume of metal carved insulation boards to change, making them unstable. Therefore, thermal stress is one of the main destructive forces of metal carved insulation boards.

2. Wind pressure. Generally speaking, positive wind pressure creates thrust, while negative wind pressure creates suction. This can cause significant damage to metal carved insulation panels. This requires the outer insulation layer to have significant wind pressure resistance. To achieve this, the insulation layer must be free of cavities. Air pockets must be removed to prevent damage to the insulation layer caused by wind pressure, especially under negative wind pressure.

3. Earthquake forces. Earthquakes can cause compression, shearing, or torsional deformation of high-rise building structures and insulation layers. The stiffer the insulation layer, the greater the seismic force, and the more severe the damage. This requires metal carved insulation panels to possess significant adhesion and adhere to the principle of gradual flexibility to disperse and dissipate seismic stress, minimizing the load on the insulation surface. This prevents the insulation layer from cracking, peeling, or even falling off due to seismic forces.

4. Water or water vapor. To prevent water or water vapor from damaging high-rise buildings, choose metal carved insulation panels with excellent hydrophobicity. Good water vapor permeability prevents water or water vapor from migrating and exposing the wall or increasing the moisture content within the insulation layer. This improves the metal carved insulation panels' resistance to rain erosion and freeze-thaw resistance.

5. Fire. High-rise buildings require higher fire protection levels than multi-story buildings. The insulation layer of a high-rise building must be highly fireproof. It must also prevent the spread of fire and the release of smoke or toxic gases. The strength and volume of the metal insulation panels must not be compromised, and the surface must not crack or collapse, otherwise it could cause harm to residents or firefighters, complicating rescue efforts.

6.The above is an introduction to the factors that affect the aging of metal carved insulation boards. If you would like to learn more about metal carved board manufacturers, metal carved insulation boards, and decorative insulation boards, please feel free to visit our website.